The good groundnut oil extraction process made in China

The good groundnut oil extraction process made in China main performance characteristics
When picking fresh leaves without traditional filming for the pre cooling can be directly into the microwave drying equipment.When The good groundnut oil extraction process made in China and the new technology of tea processing his time than traditional production shorten the above four small, use labor per shift just 2 people, improve labor efficiency is 400%, and greatly reduce the labor intensity of the workers.
Advanced microwave, according to the requirements of the tea leaves at different stages dehydration rate to filming for the level with high efficiency.

The good groundnut oil extraction process made in China

1. Groundnut oil extraction process machine introduction:

(1) Function: Groundnut oil extraction process system is an oil Groundnut oil extraction process through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.

(2) Use range: Solvent Groundnut oil extraction process fits for pre-press Groundnut oil extraction process of high-oil-content materials and direct once time Groundnut oil extraction process of low-oil-content materials.

(3) Main parts: The Groundnut oil extraction process machine series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.

2. Groundnut oil extraction process machine main parts:

(1) Solvent pumps: continuously spray solvent to the rotary-type extractor

(2).Rotary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mied oil).

(3). LD: usd to separate the solvent from the wet meal.

(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.

(5). Miscella tank 2nd: the purified miscella will be pumped into it.

(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3. Groundnut oil extraction process machine main process:

(1) The material (for pretreatment) is sent to rotary Groundnut oil extraction process by the scraper conveyor. The material will extracted by the solvent or mi oil. After this step, we will get meal and mi oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary Groundnut oil extraction process.

(3) After the mi oil from the rotary Groundnut oil extraction process enters into 1st evaporator and 2nd evaporator, most of the solvent in the mi oil is separated.

(4) The mi oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary Groundnut oil extraction process.

4. Groundnut oil extraction process machine advantages:

(1) Adopt stainless steel filed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good Groundnut oil extraction process effect;

(2) The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;

(3) The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage.

(4) The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity.

(5) The high material layer of the extractor helps to form immersion Groundnut oil extraction process, reduce the meal quality in miscella, improve the quality of crude oil and reduce the evaporation system scaling.

(6) Specially suitable for the Groundnut oil extraction process of various pre-pressed meals.

5. Groundnut oil extraction process machine technical parameters:

6. Professional advice for Groundnut oil extraction process machine

Please kindly inform us your required daily capacity, treated quantity, raw material, covering space and related data,so that we can make flow chart production line for you as your requirement. we will stand at your point to suggest low cost and suitable production line for you. Sincerely want to cooperate with you.

LDLD&Oil Machine Co.,Ltd is a large-sized joint-equity enterprise which specialize in producting edibl oil mechanical equipment andit is aslo a group enterprise integrating scientific research, manufacturing,sales as one.

Our products are exported to more than 30 countries,and regions such as Russia,India,South Afica, Ukraine, Nepal,Indonesia and so on.

If you want to learn more or purchase the equipment, please send the enquiry to me.

The good groundnut oil extraction process made in China are obtained from a variety of seeds, s and nuts. Most common types of oil-bearing seeds and nuts are Canola, Castor, Coconut, Corn (Maize), Cottonseed, Mustard, Olive, Palm, Palm-Kernel, Peanut (Groundnut), Rapeseed, Safflower, Soybean, and Sunflower. The good groundnut oil extraction process made in China are obtained from Almond, Avocado, Cashew, Grapeseed, Jatropha, Pecan, Pine, Shea, and Walnut. There are literally hundreds of other seeds and nuts that are available regionally around the world.

AAA1
The good groundnut oil extraction process made in China is necessary for oils & fats or animal oils & fats so they can be used for cooking and frying foods. Chemically speaking, oils are Tri-Glycerides or “Fatty-Acid Glycerin Esters” (FAGE). One Glycerin molecule combines with three Fatty-Acid molecules to form one FAGE. Oils are a blend of different types of FAGEs. The Oils can be differentiated on the basis of the length of carbon chain in the Fatty Acids and the number and location of double bonds in the carbon chains of the Fatty Acids. Greater the number of double bonds between two carbon atoms, the greater is the extent of “unsaturated” fatty-acids in the fatty-acid profile of the oils. “Unsaturated” oils and fats are considered more desirable than “saturated” oils and fats from health point of view.

AAA2
The good groundnut oil extraction process made in China in the tresher can separate the fruit from the bunch. The fruit will be conveyed to the digester through elevator, and the empty bunch will be conveyed to the outside part through scraper conveyor. The The good groundnut oil extraction process made in China adopts once forging technology, which can make the equipment more solider and durable. At the same time, Shandong Leader Machinery Co.,ltd.we have already designed the non spindle tresher, which is driven by the link chain. It can save the producing cost in a large scale.

AAA3

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Contact Person: Jayson
Company Name: Shandong Leader Machinery Co.,Ltd.
Telphone: 86-531-82633959 (Working Time)
86-18905316466(Nonworking Time)
Company Location: Leader Industrial Park,Jinan,Shandong
Contact Person: [email protected]