Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982

Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982 produced and supplied by Shandong Microwave Machinery Co.,Ltd.
Small oil machine includes a series processing procedures as degumming, neutralization, bleaching, deodorization and winterisation. In general there are two methods of Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982, one is physical refining and the other is chemical refining by Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982. However, no matter what kinds of reining methods, Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982are all done with the help of various oil processing equipment and machinery, and Small oil machine are Small oil machine used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, peanuts , sesame seeds, and soya bean seeds etc.
Main Steps of Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982
1. Crude Oil Degumming of Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982: In this step gums in crude oil are removed by hydration with the help of phosphoric acid.
2. Neutralization of Small oil machine: In this step free fatty acids are neutralized by Small oil machine using sodium hydroxide and convert them into soap. Additional impurities are also removed by LDorption on soap.
3. Bleaching of Small oil machine: During bleaching, unwanted pigments are LDorbed physically and oil will become much clearer.
4. Deodorization of Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982: Deodorization is used to remove unacceptable odors by steam distillation, the odoriferous compound are stripped off with the help of live injected steam into heated oil under high vacuum pressure.
5. Dewaxing (necessary for cold areas) of Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982
Some kinds of oil like sunflower, maize germ or corn oil have waxes inside, if these impurities are not removed by Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982, the oil will freeze easily under low temperature, thus effecting oil quality and appearance. so Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982 is necessary in extremely cold areas.

Professional oil facpalm oil milling machine

Safety:

1. we using auto welding machine to make the reactor,which can guarantee the quality of welding seam,avoid cracking and has a long life for about 8 years.

2. professional heating treatment and x-ray detection chamber for welding seam .

3. vacuum system to prevent oil gas be back to reactor cLDing accident.

4. with professional thermometer , profession pressure gauge and safety valve.

Environment friendly:
1.de-dusting system to prevent gas and dust from coal burning

2.the eLDLDt gas will be recycled for heating reactor ,no gas pollution

3.well sealing on every junction parts to prevent gas leak,no smelly

LD life :
Using Q345R special steel plate ,welding seam with auto welding an will get heating treatment and x-ray detection to extend the life of reactor to the most extend, and the life will 8 years

Energy saving:
1. well sealing for heating system ,no gas leak and saving fuel.

2. the eLDLDt gas will be recycled for reactor heating.

1. palm oil milling machine Introduction

2. Main part of palm oil milling machine

a. Palm fruit reception:Transport FFB to reception station, flow to the scraper conveyer, conveyed to sterilizing station.

b. Sterilizaiton: FFB transported by scraper conveyer fall into sterilizing tank, make FFB soft,get more oil yield. sterilizing time 90~120mins, temperature 130~145°C

c.Threshing: After sterilizing, fruit bunch transported to thresh machine, separate palm fruit and empty fruit bunch.

d:Digesting: Before press palm fruit, should be crushed separated pulp and kernel

e.Oil press: After crushing and digesting, the maxture of palm fruit and kernel fall into special palm oil presser

f.Clarification:Filter the oil and use centrifuge to separate oil and impurities.

g. Kernel recovery:After press, the kernel and cake will be transported to kernel recovery station. Separating nut and shell, then go to kernel oil press.

h.Palm kernel oil filteration: Use vibrating filter to filter the oil to remove impurities in it.

3. Photos of palm oil milling machine

Main Business Field:

1.10-500T/H oil material first cleaning,drying and storage section turn-key project.
2.100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
3.Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
4.30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
5.20-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
6.10-200T/D Fatty acid esterification production cooking oil production line.
7.30-300T/D Palm oil extraction turn-key project.

Our company always put the interests of customers,product quality and service as first ,and always adhere

to the"no best, only better" as our purpose. We will be commitment to provide high quality products with perfect site services and after-sales service. Now the specific commitments are as follows:

1.Ensure provide complete sets of equipment and accessories timely.

2.Ensure that one-time installation debugging acceptance.

3.To provide high quality material with preferential price.

4.Priority to provide customer our new craftworks and products.

5.Free training technological operator to ensure the trained staff can operation independently.

6.In the installation process,we will appoint an installation supervision staff on the spot.

7.we will offer an experienced project manager, organize a good installation team for the work.

Customer visit:

1. Q: Which kind of materials can be processed?

A: All kinds of oil seeds. For example, rice bran, corn germ, cottonseeds, peanut, sunflower, soybean, rapeseed, etc.

2. Q: What's the capacity?

A: 5-2000 tons per day.

3. Q: The materials of our machine?

A: The stainless steel and carbon steel.

4. Q: Can you install the machine in local place.

A: We will send our engineers to local place to help installing the machine.

5. Q: How to operate the machines?

A: Our engineers will train the worker how to operate it after running.

If you have interest in our palm oil milling machine,please kindly send us your inquiry details in the Below , Click "Send" Now!

Shandong Microwave Machinery Co.,Ltd.is a Small oil machine factory specializing in the production of Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Small oil machinecustomers with design and services of 1-2000 tons Palm oil milling machine with ISO,BV,CE,Oil machinery manufactuter from 1982. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Small oil machineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Small oil machineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Small oil machineequipment has been successfully exported to more than ten countries: Russia, LDtralia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)

Contact Person: Jayson
Company Name: Shandong Leader Machinery Co.,Ltd.
Telphone: 86-531-82633959 (Working Time)
86-18905316466(Nonworking Time)
Company Location: Leader Industrial Park,Jinan,Shandong
Contact Person: [email protected]