palm fruit oil production line

palm fruit oil production line produced and supplied by Shandong Microwave Machinery Co.,Ltd.
1.Application scope of Seed Hydraulic Press Machine:
palm fruit oil production line made by Shandong Microwave Machinery Co.,Ltd. company has many advantages: palm fruit oil production line is easy to operate, high oil press rate, rare to replace wearing parts, so Seed Hydraulic Press Machine is the most advanced equipment palm fruit oil production line can replace of the manual operation of the sesame oil. This palm fruit oil production line can press at least 2 to 7 kilograms per batch, the time is about 4 to 6 minutes, so Seed Hydraulic Press Machine is very suitable for the citizens who live in the big and medium cities becLDe they want get the high quality of oil of spending money. palm fruit oil production line is also can be used in the countryside, becLDe the speed of oil pressing is fast so people can bring palm fruit oil production line oil raw material to press oil. In this way, palm fruit oil production line can be assured of the purity of their oil.palm fruit oil production line can be used for process many kinds of raw material: sesame, walnut kernel, peanut, pine seed (better to get rid of the shell), almond, spricot kernel, perilla, cocoa bean, linseed and other oil crops.
2. Structure of Seed Hydraulic Press Machine:
palm fruit oil production line mainly includes three parts:
1. Main engine 2. Hydraulic system 3.electrical system
The following is the specific introduction of palm fruit oil production line:
1. main engine of palm fruit oil production line:
Seed Hydraulic Press Machine Main engine includes base,upright,top plate,oil drip pan,nut and etc palm fruit oil production line is one of the main parts. When the oil material is put into the assembly of the press boring,then palm fruit oil production line being driven up by the oil cylinder piston ,oil will be outflow from the gap of press boring,and then palm fruit oil production line pass the oil drip pan to the drum for oil storage.

palm fruit oil production line

palm fruit oil production line

How to get crude palm oil?

Palm oil process line includes sterilizing, threshing, digesting, pressing, clarification, purification

and drying. Then you can get crude palm oil.

Sterilization: Boiling and sterilizing bunches with high temperature( more than 145 C).

Palm fruit bunch are airtight sterilized in sterilizer. The purpose is to prevent enzymes

broken down, avoiding FFA content in oil further increase; easy threshing machinery;

pretreatment peel, prepared for the follow-up processing; pre-conditioning stone, reducing

the damage kernel.

Threshing:Separating fruits from bunches by strong vibration. The purpose of threshing is

to separate oil palm fruit from the fruit bunch through strong vibration, Threshing equipment

is revolving drum thresher. The separated oil palm fruit is ejected then into the pressing section.

Empty fruit bunch be ejected to the yard from the other side of the revolving drum, or shipped out

from the plant as palm orchards slipcover to recycling use, or burning in the locale as fertilizer

for agricultural land.

Digesting:Stiring fruits. Before pressed, oil palm fruit first be carried out cooking, sterilized fruit

must be re-heated to make the pulp soft and damage pulp cell structure.

Pressing: After pressing, oil palm fruit is divided into two parts: oil, water, solid impurities mixture

and the press cake (fiber and nut). Oil, water, solid impurities mixture inflow to oil purification section

by the crude oil gutter; pressed cake into the fiber- recovery section by breaking screw conveyor.

Clarification and purification: Removing oil and sludge (get 90% pure oil), the oil

contains 45%-55% moisture, sludge, and other wastes. Machine-pressed crude oil first diluted

with water washing, the fiber material removed from the oil through settlement and filtration,

and then carry out continuous settlement, the whole divided into two parts: oil

and sediment.

Drying: Through centrifugal separation and vacuum drying, oil is pumped into the storage tank

for storing; oil sediment by filtration and dirt oil separation, oil proceeds second settlement,

dirty oil mixture proceeds clarification separation, skim oil then be carried out a second settlement,

sewage pumps to sewage treatment pond for dealing.

Some datas

Crude palm oil standard:

Kernel standard:

Production quality index:

1,transparency : clear and transparent.

2,smell and taste: no strange smell;

3,color (lovibond colorimeter 133.4 slots) ≤ R1Y10;

4,moisture and volatile matter: ≤ 0.10%;

5,impurities content : ≤ 0.10%;

6,acid value (mgKOH/g) : ≤ 0.12;

7,peroxide value (mmol/kg): ≤ 3.

How to get crude palm kernel oil?

Crude palm kernel oil process line includes polishing, crushing and pressing.

Polishing: Separating nuts and fiber by wind drying system. Pressed cake broken by breaking

screw conveyor and then transported into the fiber separation air net and fiber polishing roller

for fiber separating. The separated fiber material is sent to the boiler room as fuel; the separated

stone is transported to stone warehouse by pneumatic conveying system for temporary storage.

Crushing: Crushing nuts to get kernels and shells. The nut is divided into two or more petal

by corrugated crusher, kernel is released. The broken mixture enters into broken mixture

separation system; separation system adopts two stage separation and water separation.

After separation, shell is sent to the warehouse for temporary storage, as boiler room fuel

when necessary.

Pressing: Pressing kernels to get crude palm kernel oil with machine as below. For more information

of this machine, please check: Full automatic pumpkin seed oil press machine

How to get better oil

If you want to get better quality oil, you can refine and fractionate it.

It includes degumming, bleaching, deodorization, deacidification and fractionation.

For more information, please check: crude palm oil refining line

Company Information

Our Strength

1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global grain and oil

industry.

2, We have deep cooperation with Henan Machine Design Research Institute and Henan University of

Technology. Our professor often go abroad attending grain and oil conference and forum.

3, We have completed service line including technical department, engineering department, project department,

electronic commerce department, domestic trade department and foreign trade department. After signing

contract, we will set up special team including engineers, installation technicians, drawing designer,

business person, after-sales service person, and so on. We will provide one-to-one service.

Our Service

• Whole set of equipment for production line.

• Motor and power control system.

• Installation material.

• Installation and test-run.

• Drawing of process description, equipment layout, foundation and

  hole, construction.

• Drawing of power control.

• Isolation and painting for equipment.

• Water recycling and cooling system outside the plant (i.e. supplementary device).

• Staff training and long-term technical service.

Main Business Field

• 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
• 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
• DTDC separated machine, the full negative pressure evaporation,
• Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
• 30-1000T/D continuous physical (chemical) refining line.
• 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
• 10-200T/D fatty acid esterification edible oil production line.

Our Certificates

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)

Shandong Microwave Machinery Co.,Ltd.is a Seed Hydraulic Press Machine factory specializing in the production of palm fruit oil production line, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Seed Hydraulic Press Machinecustomers with design and services of 1-2000 tons palm fruit oil production line. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Seed Hydraulic Press Machineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Seed Hydraulic Press Machineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Seed Hydraulic Press Machineequipment has been successfully exported to more than ten countries: Russia, LDtralia, India, Afghanistan, Cameroon,and so on.

Contact Person: Jayson
Company Name: Shandong Leader Machinery Co.,Ltd.
Telphone: 86-531-82633959 (Working Time)
86-18905316466(Nonworking Time)
Company Location: Leader Industrial Park,Jinan,Shandong
Contact Person: [email protected]