Multifuctional small coconut oil extraction machine

Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price

Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce Multifuctional small coconut oil extraction machine with high quality, high performance and the best prices.

Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.

Specifications

small coconut oil extraction machine
1 pure oil quality
2 Mature technology
3 High oil yield
4 Automatic control

Multifuctional small coconut oil extraction machine

Our Factory

Main business:

• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.

Small coconut oil press machine:

small coconut oil press operation priciple:

The first step:Open the cap of the oil tank,and fill in the hydraulic oil into it.

The secind step:Open the red switch of Power Distribution Cabinet to preheat the machine.

The third step:One hand hold the handle,then the other one pull the cap of the machine,and

pour the oil material into the charging barrel.

(if the oil material is not so much,we can put them into the special bag,cos the heavy pressure can make the oil material flow through the oil-way,and stop it up).

The fourth step:Put the iron mat onto the oil material and close the cap,and tighten the nut on it .

The fifth step:Turn the high-pressure reflux valve and the machine start to work.At the same time,the oil tank will go up to press the oil material and the oil follow from the oil way by the high pressure.

The sixth step:There will be an oil-out beside the lacquer tray,below it,we can put down the oil can for oil collection.

The seven step:The machine will stop work for a while, when the pressure is under some degree,and after several minutes,the second pressing will begin automatically,ans when the pressure goes to the adjusting degree,the presser will be stoped for the first ending.

The eight step:Stop the the high-pressure reflux valve and let the oil tank go down,loosen the nut and open the cap,then the meal will go up as the oil tank rising up,take the meal out of the machine,and break it manually.

Tips:The second pressing and third pressing are the same as the first one.And there is a temperature-controlled setting on the distribution box,when you open it,the machine can be heated by the infrared ray,and you can choose the ways of pressing,hot or cold by yourselves.

Small coconut oil extraction machine

Rnquirement for coconut oil solvent

1.Dissolve in any proportion solvent at room temperature or low temperature

2.Wide choise well

3.Stable Chemical property

4.Recycle from oil and cake easily

5..The solvent can not react with all compenets and equipment material of the oil

6..The solvent should high purity and narrow scope of the boilling point

7.Small solubility,easy to separation and recycle

8.Solvent has no toxicity itself,neutral,no objection odor,make sure the sanitary inquirment and protecting pollution

9.Not inflammable and explosive

10.Rich source,and low price,apply to the demand of large scale prodution

Coconut oil knowledge:

There are 30%-40% oil and 50% water in fresh coconut,while ,there are 60%-70% oil in copra,just 4%-7% water,coconut oil possess sepcial fragrance.

The oil is extracted by crusher or screw persser,it recoveried residual oil from cake with the second extraction as a supplemnt by solvent .

Mechanical extraction process:To transgfer the copra which contain 10%-12% water to automatic balance and magnetic speration to remove junk iron, and grind it to particles that the diameter is about 0.3cm.

Put the embryo in the 115°C horizontal cooker with 20min,under this condition,fat cell crack,phospholipid sedimentation,water containing down to 3%.To transfer the same size embryo after cooked to presser for continuous extraction.Grease discharge with uniform decline curve at the most of time.Generally speaking ,coconut cake residual oil is 7% after processing.

Cold pressed virgin coconut oil terms of payment :

The sum equal to 30% of the total amount of the Contract must be transferred by the buyer to the Seller’s account directly within Five (5) bank working days from the date when the Contract has been both signed as down payment.

The sum equal to 70% of the total amount of the Contract will be transferred by the buyer to the Seller’s account directly after checking and accepting the finished equipment in the seller's factory at five(5) bank working days .The goods are deemed accepted by the buyer after the signing of the"The act of acceptance of the equipment"by the representatives of the seller and the buyer.

Cold pressed virgin coconut oil

Please contact us with best service after sales

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Multifuctional small coconut oil extraction machine.Shandong Leader Machinery Co.,Ltd. manufacture Multifuctional small coconut oil extraction machine making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as Multifuctional small coconut oil extraction machine ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Multifuctional small coconut oil extraction machine, inform us raw material you want to use for Multifuctional small coconut oil extraction machine,and specific requirements for Multifuctional small coconut oil extraction machine.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.

Contact Person: Jayson
Company Name: Shandong Leader Machinery Co.,Ltd.
Telphone: 86-531-82633959 (Working Time)
86-18905316466(Nonworking Time)
Company Location: Leader Industrial Park,Jinan,Shandong
Contact Person: [email protected]