LD selling products microwave drying machine for graphite

Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave energy and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.

LD selling products microwave drying machine for graphite of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.

Tunnel microwave herbs dryer is for drying and sterilizing medicinal materials and pills,for drying and sterilizing and heating materials in strip shape, cube shape,small&round shape,leaves type, powdery form as well as filter cake which have high water content and certain and certain viscosity. It is also used for sterilizing medicinal liquid before and after packing.

LD selling products microwave drying machine for graphite

1.Application:

The equipments are used for the rapid desiccation of power ,granular,pasty materials,such as Glass fiber, chemical raw materials, cellulose (eg hydroxyethLD cellulose, carboxymethLD cellulose, etc.), mannitol, nickel hydroxide, lithium cobalt oxide, graphite, carbon brushes, silicon carbide, calcium chloride dihydrate, activecarbon, zirconium oxychloride, zirconium oxide, copper oxide, aluminum oxide, zirconium hydroxide, zirconium carbonate, copper carbonate, manganese carbonate, is zirconium sulfate, ammonium zirconium carbonate, zirconium silicate, zirconium potassium carbonate, oil-based ink drying agentcross-linked anti-agent, water-based ink, expandable graphite, a variety of ceramic zirconium oxide, iron oxide, cobalt oxalate etc.Water content from 40% to 0.5% after drying ,drying time only need 5~6 minutes,temperature can be controlled in 0~200celsius degrees.

2.Advantages:

Moisture of chemical products is very low in general,such as ammonium chloride (1%),products purple(4%)have drying process in the production .

Traditional crafts often use steam-heated drying,long production cycle,dried quality is poor,such as copper sulfate,although centrifugal dewatering,but there is still a small amount of absorbed water stained ,in order to dehumidify these stained water ,while heating using steam ,must evaporate absorbed water and copper sulfate materials,require more heat to complete the drying task.Microwave heating features:

1 Penetrating whole heating,microwave can penetrate material internal,heating inside and outside at the same time,the heating rate is very fast;

2 Selective heating,due to the different electrical characteristics of material media,water and material have different microwave absorption capacity,microwave is preferred role to the materials that have strong absorption ability.

Use microwave heating characteristics,not only can shorten the production cycle,improve product quality,save enerLD(efficient),but also can improve the working environment,there is no dust pollution.Therefore, chemical products drying is playing advantages of microwave heating and drying technoloLD.

3.Technical Parameters:

4.Pictures:

5.Guarantee and after-sales service

For the whole equipment,warranty is 12 months,within 12 months,if have equipment quality probleLD,we will provide accessories freely. After the expiration of the warranty period,if have spare parts problem,we only receive the cost of required replacement parts.We commit we will provide free technical support of equipment all whole life.

6.Packing and Shipping

1.Transportion:By vessel

2. Delivery Term:FOB/CFR/CIF

3. Delivery time:25 work days after having received deposit

4. Package:wooden cases(fully meets with export package requirements)

5. Payment TerLD:50% deposit by T/T,balance 50% paid by T/T before shipment.50% deposit by T/T,balance 50% paid by L/C before shipment.

NOTE:We can specially design the machine according to your production's features.

JINAN LD machinery equipment Co.,Ltd.

Contact Person: Jayson
Company Name: Shandong Leader Machinery Co.,Ltd.
Telphone: 86-531-82633959 (Working Time)
86-18905316466(Nonworking Time)
Company Location: Leader Industrial Park,Jinan,Shandong
Contact Person: [email protected]