seed extration,canola seed oil solvent extraction plant equipment,edible oil production

seed extration,canola seed oil solvent extraction plant equipment,edible oil production produced and supplied by Shandong Microwave Machinery Co.,Ltd.
Small oil machine includes a series processing procedures as degumming, neutralization, bleaching, deodorization and winterisation. In general there are two methods of seed extration,canola seed oil solvent extraction plant equipment,edible oil production, one is physical refining and the other is chemical refining by seed extration,canola seed oil solvent extraction plant equipment,edible oil production. However, no matter what kinds of reining methods, seed extration,canola seed oil solvent extraction plant equipment,edible oil productionare all done with the help of various oil processing equipment and machinery, and Small oil machine are Small oil machine used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, peanuts , sesame seeds, and soya bean seeds etc.
Main Steps of seed extration,canola seed oil solvent extraction plant equipment,edible oil production
1. Crude Oil Degumming of seed extration,canola seed oil solvent extraction plant equipment,edible oil production: In this step gums in crude oil are removed by hydration with the help of phosphoric acid.
2. Neutralization of Small oil machine: In this step free fatty acids are neutralized by Small oil machine using sodium hydroxide and convert them into soap. Additional impurities are also removed by LDorption on soap.
3. Bleaching of Small oil machine: During bleaching, unwanted pigments are LDorbed physically and oil will become much clearer.
4. Deodorization of seed extration,canola seed oil solvent extraction plant equipment,edible oil production: Deodorization is used to remove unacceptable odors by steam distillation, the odoriferous compound are stripped off with the help of live injected steam into heated oil under high vacuum pressure.
5. Dewaxing (necessary for cold areas) of seed extration,canola seed oil solvent extraction plant equipment,edible oil production
Some kinds of oil like sunflower, maize germ or corn oil have waxes inside, if these impurities are not removed by seed extration,canola seed oil solvent extraction plant equipment,edible oil production, the oil will freeze easily under low temperature, thus effecting oil quality and appearance. so seed extration,canola seed oil solvent extraction plant equipment,edible oil production is necessary in extremely cold areas.

Canola oil solvent extraction equipment/

Canola oil solvent extraction equipment

Raw Material

The oil machine is suitable for different materials, but the process of each materials is various. If you really need to process oilseeds, welcom to know much from us. The main materials is rice bran, peanut, palm, sunflower, corn germ, soybean, sesame, cottonseeds and so on.

The whole process for canola oil extraction machine includes canola pretreatment, canola oil solvent extraction machine and canola oil refinery sections.

1. Craft flow for canola pretreatmentworkshop

Canola→ magnetic box → cleaning → husking machine → flaking roll → plate dryer → to extraction workshop

Main Equipments:

1. Magnetic box: Clearing the iron impurity in the canola. In order to avoid the harmful to the following machines, the iron impurity need be moved first.

2. Cleaning: There are many different imputities in the canola such as small stone, earth, straw and so on. They are not only broken the machine, but also effect the quality of final oil.

3. Husking machine: This will help to separate the shell from the seed.

4. Flaking roll: The canola pieces need be make to think cake. At the same time, the cell in the canola is broken, so the oil is easy to go out.

5. Plate dryer: The water content of the extractor must be about 10%, so the dryer is used to adjust the water content in this step.

2.Craft flow for edible oil extraction workshop

solvent

↓

extractor → mixed oil → 1st and 2ndevaporation → stripping tower → crude canola oil

Wet meal → DTDC toaster → cake

edible oil production line/oil solvent extration oil refining/edible oil production

Main Equipments:

1. Roary extractor: The spray and soak the cake with solvent, so that oil fats can be dissolved in solvent

(form miscella). After this step, wet meal and miscella (mixed oil) are got.

2. 1st evaporator: The miscella (mixed oil) will be sent to 1st evaporator to separate the oil and solvent.

About 85% of oil can be separated from the mixed oil in this step.

3. 2nd evaporator: After the separating in the 1st the evaporator, the mixed oil is sent to 2nd evaporator.

By the higher temperature and vacuum, 95% of the oil is get out from the solvent.

4. Stripping tower: This is the lastest step to separate the mixed oil. In this machine, all the oil will be seperated from the solvent.

5. DTDC toaster: The cake from the extractor will enter the DTDC toaster. The solvent in the cake can be moved out. Then the solvent can be recycled. The cake after separating solvent will dried in the toaster. Then you can storage it directly.

6. Condensers: The solvent from evaporate, stripping tower and toaster will recycled by the condenser. Then the running cost will be reduced.

3.Craft flow for edible oil refining workshop

Crude canola oil → degumming and deacidification→ decolorization→deodorization → refined canola oil.

Main Process:

1. Degumming and deacidification: The gum and acid in the oil will moved in this step. There are different ways to process it. The physical way is suitable for low acid oil and big capacity, while the chemical way is suitable for the small capacity and high acid oil.

2. Decolorization: The white clay is used to move the color of the oil. For different market, people like different color oil, so you can control the color by the quantity of the white clay.

3. Deodorization: The oil will have the special smell of the oilseeds. It also contains the smell of white clay, so we need more the smell which people don't like. The high temperature steam is used to move the smell of the oil.

Certificate:

Customer visit:

If you are interested in our Machine ,please kindly contact us with your required daily capacity, treated quantity, raw material and related data, then we would suggest suitable production line and make flowchart for you as your requirement.

1. Q: Which kind of materials can be processed?

A: All kinds of oil seeds. For example, rice bran, corn germ, cottonseeds, peanut, sunflower, soybean, rapeseed, etc.

2. Q: What's the capacity?

A: 5-2000 tons per day.

3. Q: The materials of our machine?

A: The stainless steel and carbon steel.

4. Q: Can you install the machine in local place?

A: We will send our engineers to local place to help installing the machine.

5. Q: How to operate the machines?

A: Our engineers will train the worker how to operate it after running.

Shandong Microwave Machinery Co.,Ltd.is a Small oil machine factory specializing in the production of seed extration,canola seed oil solvent extraction plant equipment,edible oil production, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Small oil machinecustomers with design and services of 1-2000 tons seed extration,canola seed oil solvent extraction plant equipment,edible oil production. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Small oil machineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Small oil machineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Small oil machineequipment has been successfully exported to more than ten countries: Russia, LDtralia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)

Contact Person: Jayson
Company Name: Shandong Leader Machinery Co.,Ltd.
Telphone: 86-531-82633959 (Working Time)
86-18905316466(Nonworking Time)
Company Location: Leader Industrial Park,Jinan,Shandong
Contact Person: [email protected]