Complete Soybean Oil Press Equipment Line

The sterilizer of Palm Oil Plant works with direct steam, the steam can weaken the activity of the enzyme, prevent it getting rancid, ensure the good quality of the crude oil. At the same time, it is good for the following treshing processing.Shandong Leader Machinery Co.,Ltd. have designed both horizontal and vertical sterilizer, for larger and smaller line.

Palm Oil Plant:
The rotating of the drum in the tresher can separate the fruit from the bunch.The fruit will be conveyed to the digester through elevator, and the empty bunch will be conveyed to the outside part through scraper conveyor. The spindle adopts once forging technology, which can make the equipment more solider and durable. At the same time,Shandong Leader Machinery Co.,Ltd. have already designed the non spindle tresher, which is driven by the link chain.Complete Soybean Oil Press Equipment Line can save the producing cost in a large scale.

Palm Oil Plant:
The digester is used to adjust the moisture and temperature of the fruit,finally it can increase the oil extraction rate. The digester adopts liquid level control system, which can distribute the material all by itself. To realize the automatic working.The presser adopts hydraulic control system to adjust the distance of different pressing worms, it is applicable to different kinds of palm fruits, and it can ensure the high oil extraction rate.

Complete Soybean Oil Press Equipment Line
Using the latest technology, under the condition of ensuring the good quality of the oil, reduce the equipment cost as much as possible, reduce the loss of the oil, in the practical producing ,the new technology can make the loss of oil less than 1.3%.

Complete Soybean Oil Press Equipment Line
Shandong Leader Machinery Co.,Ltd. do use air flue system to separate the shell from the kernel. At the same time,Shandong Leader Machinery Co.,Ltd. do adopt unique mud bath equipment to do the separating according to the different gravity of the shell and kernel. Which has higher separating rate.

Shandong Leader Machinery Co.,Ltd. is a large-sized joint-equity enterprise which specialize in producting edible oil mechanical equipment andit is aslo a group enterprise integrating scientific research, manufacturing,sales as one.Our products are exported to more than 30 countries,and regions such as Russia, India, South Afica, Ukraine, Nepal, Indonesia and so on.

Complete Soybean Oil Press Equipment Line

Soybean Pretreatment Plant Technical Index

1.Soybean material index

1.1 Smell,colour:normal

1.2 Water content:≤13%

1.3 Impurity content:≤1.5%

1.4 Oil content:18~22%

2.Main consumption index

2.1 Electricity:≤35.5 kwh/t

2.2 Steam: ≤240 kwh/t

3.Soybean flakes quality index

3.1 Thickness: ≤0.3mm

3.2 Water content: 5~7%

4.Pretreatment craft flow:

soybean→cleaning→de-stoning→crushing→conditioning→flaking→drying→go to extraction workshop

5.Technology highlights:
1 Mechanized and continuous, reduce human labor and reduce labor costs.
2 More advanced dust removal system, ensure workshop clean, reduce dust emission at the same time
3 All the transmission equipments adopt special configuration, reliable operation and long lifetime.

Soybean Oil Extraction Plant Technical Index

1. Material index

1.1 Water content: 5~7%

1.2 Impurity content:≤0.1%

1.3 Oil content:18~22%

1.4 Fines content:≤5%

2. Main consumption index

2.1Electricity:≤25.0KWH/t

2.2 Steam:≤300 Kg/t (environment temperature:20℃,1Mpa saturated vapor)

2.3 Solvent: ≤3.5KG/t (vegetable oil extraction solvent(GB 16629-2008))

2.4 Recycled water:≤200 Kg/t

3. Product quality index

3.1 Cake

3.1.1 Residual oil: ≤1.0%

3.1.2 Water content:12-13%(adjustable)

3.1.3 Residual solvent:≤500PPM

3.3.2 Crude oil

3.2.1Total volatile matter : ≤0.2%

3.2.2 Residual solvent:≤100PPM

4. Soybean extraction workshop craft description

solvent collection evaporation and stripping

↑ ↑

Soybean flakes→oil extraction→mixed oil→crude oil

↓

solvent collection←wet cake desolventizing→finished cake

5.Technology highlights:

1.Mixed oil adopts two levels process in removing impurity, dense mixed oil firstly into primary rotary liquid separator to remove larger particles, and then enter the secondary rotary liquid separator to remove impurity. After rotating liquid separation, the mixed oil nearly without solid impurities. After separation, the cleanermixed oil into the mixture oil staging tank for further precipitation, the bottom sediment of the mixing tank back into the extractor regularly by slag pump. Two process filter of the mixed oil and the use of negative pressure evaporation process, greatly reduce fouling in evaporation system, and evaporation system cleaning cycle can be extended.

2. Adopting micro negative pressure process, save steam and reduce energy consumption.

3.The secondary steam in the condensed water tank can be used for waste water preheating, reduce the steam consumption.

4.Collectign all the steam in the extraction workshop and pump into the boiler room for secondary use, effective utilize the waste heat, saving workshop production water.

Soybean Oil Refinery Plant Technical Index

1. Finished oil quality index

1.1 Lovibond dispoable cuvettes (133.4mm): yellow ≤20 red≤2.0

1.2 Smell, taste:well

1.3 Moisture and volatile matter(%): ≤0.05

1.4 Peroxide value (mmol/kg): ≤5.0

1.5 Smoke point (℃): ≥215

1.6 Residual solvent content (mg/g) : not detectable

1.7 Transparency: clear, transparent

1.8 Acid value(KOH)/(mg/g): ≤0.20

2 Main economic indicators

2.1 Electricity: ≤31.1 kwh/t

2.2 Steam: ≤220 kwh/t

2.3 Water consumption:≤0.2t/t

3 Soybean oil refinery plant craft description

Phosphoric acid, alkali and hot water vacuum

↓ ↑

Crude oil→dephosphorization,degumming,washing→dry dehydration, de-color→filtering

↑ ↓

bleaching clay waste bleaching clay

→ deodorization→refined oil

Our factory

Our workshop processing machinery for Soybean Oil Production Plant

Our Exhibitions

1. Are you the real manfuacture or just trading company?

Our company is a professional manufacturer of oil machines, glad to make a brief introduction of our company for you!

• 60 years' experience
• The largest-scale oil machinery manufacturer in China, covering an area of 100,000 square meters, owning more than 580 staffs.
• The outstanding membership corporate of Chinese cereals and oils association, and they do quality quarantee for us.
• Obtain 23 national patents (including 7 invention patents, 6 international medals, 2 national awards and 2 provincial prizes.
• With 180 person professional R&D team to customize scheme for customers

2.Can you do turn- key project?

Yes, we can. We have the experience to undertake big project.

After delivering the equipments, we will offer you all the relevant documents, like manual book, equipments layout ,installation drawing and so on. And we will delegate engineers to customer’s place according to customer’s requests to help installing all of the equipments ,commissioning and debugging until the plant running smoothly.

3.Can we visit the running oil factory?

Yes, we can find running factory for you to visit! Welcome for your coming!

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Complete Soybean Oil Press Equipment Line.Shandong Leader Machinery Co.,Ltd. manufacture Complete Soybean Oil Press Equipment Line making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Palm Oil Plant for you reference,such as Complete Soybean Oil Press Equipment Line ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Palm Oil Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Complete Soybean Oil Press Equipment Line, inform us raw material you want to use for Complete Soybean Oil Press Equipment Line,and specific requirements for Complete Soybean Oil Press Equipment Line.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Palm Oil Plant.

Contact Person: Jayson
Company Name: Shandong Leader Machinery Co.,Ltd.
Telphone: 86-531-82633959 (Working Time)
86-18905316466(Nonworking Time)
Company Location: Leader Industrial Park,Jinan,Shandong
Contact Person: [email protected]